Into the 2 era of innovation, Internet + traditional industry has become a new industry upgrade. Xinghua port stainless steel pipe factory to take continuous innovation and new mode, the Internet continues to innovate. Continue to reduce production costs, to win the healthy development of the iron and steel industry

We analyze the necessity and the basic point of the industry situation of our structural adjustment are as follows:

1) to prevent a repeat of the new round of redundant construction under the target of "industry revitalization", the main risk is that the construction of low level and high level is still spreading, and some places will be included in the planning, or are being implemented under the banner of "industry. Seamless steel pipe industry has been building ten sets of continuous rolling machine (MPM, PQF) in the case of excess capacity, A City, T Province, city also plans to introduce PQF mill to build a million tons of oil casing base plan; Tianjin city in the past year will increase the pipe production line 50, including welded pipe line (China Metallurgical newspaper 09 years, August 1st, B4 version). If the country is so "dagankuaishang", a new round of asset bubbles and repeat.
(2) the development direction of HFW welded pipe in the development direction of HFW pipe is seamless, and continue to work hard for the direction of high-end products and high added value products. Production of HFW pipe N80 Q phi 244.5 and phi 339.7 casing,. It shows that the HFW steel pipe is not only growing rapidly, but also the quality of the varieties in the field of oil well pipe is improved. On this basis, it should continue to enter the high quality products in various fields. Developing new products is an eternal topic.
(3) the development of seamless pipe industry in recent years, China's seamless pipe industry output growth in recent years, accounting for 50% of global competitiveness, export is also a lot of output, should be said to achieve great success, but there are different views, metallurgical industry planning experts have commented: "the production and export of seamless steel tube is not worthy of our pride and pride, but should be caused by seamless steel tube." Western developed countries in the last century 60 - 70 years began to reduce the proportion of seamless steel pipe production, increase the proportion of welded pipe, the proportion is about 4:6, and today's situation is similar to the situation in China. However, the western developed countries have further reduced the ratio of seamless steel tubes, such as Japan, the United States accounted for only 25%, the United States only 18%, South Korea is smaller, <1%. China's seamless steel pipe authority also recognized this trend, but they did not resolve the reason for the sharp decline in the proportion of seamless steel pipe. In fact, there are two main reasons: one is the seamless steel pipe production process has two heating process, the heat loss of about 30%, is not conducive to energy saving; two is the seamless steel pipe in the hole and the diameter of the rolling process is relatively small, the impact toughness is not high enough. This inherent defect in the process of the development of seamless steel pipe. Thus, it also makes it difficult to continue to develop.
At present our seamless precincts of insight also recognize that energy issues, he pointed out: "is not a seamless steel pipe production enterprises real scale implementation of continuous casting billet hot charging process." China seamless steel pipe industry development direction, I think there are mainly two, one is in energy saving efforts; two is the development of new products to meet the needs of the market. For example, the former coal mining industry is not long needed to support seamless steel pipe, but not to arrive, and finally by their own construction seamless steel pipe machine group production of hydraulic steel pipe, about 800000 tons per year.
(4) a unified standard of steel pipe shall be formulated
Currently China seamless steel pipe standard system, the system of welded pipe standard, fragmentation, the user selects the specifications and varieties of the steel tube is very convenient, is not conducive to international standards. This problem, several times, due to the seamless pipe industry, some of the experts on the pipe is still a doubt. In fact, the development of pipe industry in China today, due to the hot rolling plate with the technology adopted a micro alloying and controlled rolling and controlled cooling (TMCP), high toughness, can be used to manufacture high strength casing such as V140, V150 and V170, but it is difficult to achieve seamless steel. These products, coiled tubing, expansion tubing, seamless pipe is also difficult to do. Seamless steel pipe industry, some experts have always suspected that the reliability of welded pipe, this concept is to change the. Today I've brought a comparison data of domestic N80 phi 139.7HFW casing and seamless steel pipe casing, both strength and anti collapse, the ductility and the dimensional accuracy of the 12 aspects, HFW casing indicators are better than those of seamless pipe; in addition, Sinopec and other users also urged to develop uniform standards of steel pipe, they take out conveying fluid seamless steel pipe standard (GB8163 - 87 and HFW welded pipe standard (SY/T5297 - 91) two indicators contrast, the indicators of welded pipe is better than that of seamless steel pipe. The standard for the development of steel pipe in the technical time is ripe.

Through the development of a unified standard, so that welded pipe and seamless pipe industry in-depth exchanges, mutual win-win, structural adjustment, harmonious development, and common for the revitalization of the steel industry and hand in hand.
(5) to strengthen the management system and mechanism of the steel pipe enterprise deepening reform of financial turmoil on the impact of the world's countries are great, Japan's first to make a reflection: large enterprises to resist the risk of performance is also very poor, also by the depth of punch. They conclude is suffering from a "big enterprise disease". The disease mainly has three aspects: institutions are overstaffed, overstaffed, (2) the information transfer is ineffective, speed of response to changes in the market is lagging behind; lack of strategy of global economic trends foreseen and enterprise development strategic direction is not clear.
Why is the world financial crisis? Why would it affect our economy? What measures should we take? These three questions are worth our deep thought. Our enterprise in the financial crisis to carefully review their existing problems and proposed measures to improve. The preliminary investigation that welded pipe enterprises in Baoji Petroleum Steel Pipe Co., Ltd. over the past few years make better, more prominent, enterprise management on a higher level, to learn and practice with more practical in view of scientific development, grasp the technology, grasp quality, grasping product innovation under the martial arts, so, with remarkable results.
Improve concentration, the first to overcome the big enterprise disease". This whether it is state-owned enterprises, or private, have a similar situation. China's iron and steel industry on this issue does not seem to be as Japanese companies (for example Nippon Steel, Panasonic) that do serious reflection. At present, China's iron and steel industry, the efficiency of large enterprises, but rather small and medium enterprises, why? Because of the steel pipe industry, especially the welded pipe industry is more and more small enterprises, so it is very high to raise the degree of concentration. How to restructure the enterprise, the enterprise should take the lead in the management system and mechanism, and can improve the competitiveness and the ability of the competition.
3.1 basic points about the situation of China's steel pipe industry